BMW built a secret M7 prototype in the 1990s and has only now shown it publicly, via a video posted on social media by BMW Classic. The car began life as a 740i before being reworked with the engine and gearbox from the E39 M5.
It never reached production, and BMW has not explained why the project stopped at a single car. The prototype is an E38-generation 7 Series, the flagship saloon of the 1990s, and it stayed under wraps for close to three decades.
What is under the skin
The engine is the S62, a 4.9-litre naturally aspirated V8 rated at 394 horsepower at 6,600 rpm, driving the rear wheels through a six-speed manual gearbox. BMW quotes a top speed of 155 mph (250 km/h), the same electronically limited figure as the E39 M5 that donated the drivetrain. The prototype weighs 4,134 pounds (1,875 kg).
A V8 and a clutch pedal in a full-size luxury saloon is the detail that stands out most, because nothing in today's flagship class offers three pedals. The weight also puts the idea in perspective: this was never going to be a sports car, but the M5's engine in a much larger body is a combination no BMW buyer could order at the time.
The clues are deliberately subtle
BMW did not dress the car up. There are no aggressively sculpted bumpers, oversized air intakes or prominent M badges. The giveaways are dark cross-spoke BBS wheels and a quad exhaust with two outlets on each side of the rear bumper.
Inside, black and beige leather trim is joined by an M steering wheel and the six-speed manual shifter. A telephone handset mounted in the rear centre console is a period touch from the late 1990s. For a car meant to preview a flagship M sedan, the restraint is the point: it looks like an ordinary E38 until you notice the details.
Why a production M7 never happened
BMW has not given a reason, so the explanation remains open. The 750i already sat at the top of the regular 7 Series range with its V12, while the E39 M5 delivered broadly the same V8 performance in a smaller, lighter and presumably cheaper package.
That overlap is the most plausible reading of the decision: a production M7 would have had to justify itself against two cars BMW already sold, one with more cylinders and one with less weight. Enthusiasts have since built their own E38s using E39 M5 engines and manual gearboxes, but a factory-built example carries a different kind of credibility.
Whether BMW will now build a production M7 has not been announced. The modern range-topping 7 Series has long been a not-quite-M car, and the E38 prototype remains a one-off.
Not even the wildest 7 Series experiment
The M7 was not BMW's most extreme 7 Series prototype. In 1988, engineers fitted a 6.7-litre V16 developed from the M70 V12 into an E32 7 Series, producing 402 horsepower. Packaging the extra cylinders left no room for the cooling system under the bonnet, so the radiators moved to the rear, behind the oversized ducts that earned the car its Goldfish nickname.
A second V16 prototype followed in 1990 with 348 hp and a five-speed automatic, wearing more conventional bodywork without the rear scoops. At 214.5 inches (5,448 mm) long, it was bigger than today's 7 Series. Neither V16 reached production, and BMW eventually dropped the idea of a flagship above the 7 Series.

